:: Rishabh Metals & Pvt. Ltd. ::

The all-new CAS particle charge measurement system takes traditional methods of measuring Streaming Potential and establishes a new era of technology and comfort in particle charge analysis. Using industry accepted techniques of titration CAS determines cationic/anionic and acid/base demands of aqueous charge systems. Both Streaming Potential (mV) and pH are measured simultaneous. Making it possible to easily determine isoelectric and flocculation points of a sample.

For more information

This system incorporate rugged industrial type probe which can withstand in harsh environment. The Multi parameter instrumentation features simultaneous measurement of several parameters at a time. The Modular system makes it ideal for custom design applications. The built in signal amplifier extends the length of measurement up to one KM range. The system controls the parameters by adding relevant / respective dosages of chemicals / coagulant. Ideal for water treatment plants, effluent monitoring, drinking water plants.

The On line PH , Turbidity , chlorine , dissolved oxygen , oil in water , Total hydrocarbon can be measured in Industrial waste water , waste water treatment plant , water treatment plant . we can provide the total solution for measuring the water ,waste water quality parameters in Industrial , water treatment & purification plants. The new Paramagnetic principle based dissolved oxygen monitor eliminate the need of frequent change of membrane & calibration. Turbidity monitors & control system: This system based on Infrared light principle. No contact of sample to optics, easy to clean & minimum aging provides reliable readings over a period of time. It can go from 1 NTU to 40 % solid in various ranges. The sensor can go up to 800 meter range from central station. For details write to us with requirement.

These are devices made of HDPE which generate a vacuum once water is passed through them, thereby enabling easy and good dispersion of flocculant powder/other specialty chemicals into water so that easy and good solution making is possible.
Eductors are used to prepare the solution of powders up to a capacity 50 kg/hr. The advantages of eductor is that better consistency of solution making is achieved (there is no lump formation) and there is negligible wastage of flocculants/ specialty chemicals.

Depending on the model, it works at minimum water pressure of 0.8 to 3 Bar and maximum water pressure of 1.7 bar to 8 bar with Suction capacity ranging from 0.5 to 50 kg/hr.

This apparatus consists of 2/4 stirrers for conducting the standard Jar test for laboratory evaluation of coagulants and flocculants.

Laboratory Flocculator has been specially designed for use in water & chemical treatment plants and it enables the plant operator to correctly estimate the dosing of alum, other coagulants and flocculants for treatment of water and thus avoid wastage of costly chemicals.

Chemists/Operators in Water Works, many a times face problems of regulating proper dosage of chemicals in the plant due to variations of the inlet water quality. Underdosing results in plant being disturbed and overdosing is normally done to avoid variations in the output of the equipment. This equipment allows the operator to simulate plant conditions in the laboratory enabling easy optimization of dosage.
This equipment is also essential to do comparative study in laboratory on the performance of various chemicals on the water/ waste water to be treated.